Diagram 8/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Towing Recognition Control Module, Trailer Operation Indicator Lamp





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J285 - Instrument Cluster Control Module

J345 - Towing Recognition Control Module, in left rear side panel Control Modules in The Rear Of The Vehicle

J519 - Vehicle Electrical System Control Module Control modules in front part of vehicle - Overview of Control Modules

J533 - Data Bus On Board Diagnostic Interface, in left footwell, near center console Control modules in front part of vehicle - Overview of Control Modules

K18 - Trailer Operation Indicator Lamp

T2i - Double Connector, black, under instrument panel, left

T2w - Double Connector, blue, under instrument panel, left

T12h - 12-Pin Connector

T20 - 20-Pin Connector

T32 - 32-Pin Connector

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B398) - Comfort System CAN-Bus High Connection 2 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

(B407) - Comfort System CAN-Bus Low Connection 2 (in main wiring harness)

# - Only models with factory trailer hitch

--- - Only models with preparation for Trailer Operation

Previous Diagram 8/4 (Tracks 29-42)