Diagram 58/13 (Tracks 155-168)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine control module, Wastegate bypass regulator valve, EVAP canister purge regulator valve 1, Camshaft adjustment valve 1, Turbocharger recirculation valve, Intake manifold runner control valve, Oil pressure regulation valve





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J519 - Vehicle electrical system control module Control modules in front part of vehicle - Overview of Control Modules

J623 - Engine control module, in the center plenum chamber Control modules in front part of vehicle - Overview of Control Modules

N75 - Wastegate bypass regulator valve
Locations
[1][2]Diagrams

N80 - EVAP canister purge regulator valve 1
Locations
[1][2]Canister Purge Control Valve

N205 - Camshaft adjustment valve 1
Locations
[1][2]Diagrams

N249 - Turbocharger recirculation valve
Locations
[1][2]Diagrams

N316 - Intake manifold runner control valve 2.0L CCTA and CBFA Diagrams

N428 - Oil pressure regulation valve 2.0L CCTA and CBFA [1][2]Diagrams

T14a - 14-pin connector, near the battery Overview of connector stations and connectors

T60 - 60-pin connector

(D189) - Connection 87a (in engine wiring harness)

Previous Diagram 58/12 (Tracks 141-154)

Next Diagram 58/14 (Tracks 169-182)