Clutch Overview, Sachs
Clutch Overview, Sachs
1 Dual Mass Flywheel
• Make sure it fits securely on the centering pins.
• Keep the clutch lining contact surface free of grooves, oil and grease.
2 Clutch Disc
• Allocation, refer to the Parts Catalog.
• Only replace together with the pressure plate.
• Removing and installing, refer to => [ Clutch, Sachs ] Clutch, Sachs.
• Installed position, refer to => [ Clutch Disc Installed Position ] Clutch, Sachs.
3 Pressure Plate
• With an adjustment mechanism.
• Allocation, refer to the Parts Catalog.
• Only replace together with the clutch disc.
• Removing and installing, refer to => [ Clutch, Sachs ] Clutch, Sachs.
• Check the ends of the diaphragm spring. Refer to => [ Checking the Ends of the Diaphragm Spring ] Clutch, Sachs.
• Check the spring and rivet connections. Refer to => [ Checking the Spring and Rivet Connections ] Clutch, Sachs.
• Approximately from 05.11: Release bearing with an additional plastic washer. Refer to => [ Approximately from 05.11: Release Bearing with an Additional Plastic Washer ] Description and Operation, and an adapted pressure plate, refer to => [ Only for Release Bearings with an Additional Plastic Washer: Pressure Plate Diaphragm Spring () with a Slightly Lower Installed Height ] Description and Operation.
4 Bolt
• M6: 13 Nm
• M7: 20 Nm
• Allocation, refer to the Parts Catalog.
• Loosen and tighten in small steps and in a diagonal sequence.