Diagram 99/21 (Tracks 267-280)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Heater/heat output switch, Data bus on board diagnostic interface, Diagnostic connection, Recirculation door motor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E16 - Heater/heat output switch, in the engine compartment, right

G143 - Recirculation door motor position sensor Climatic (Manual Climate Control) A/C System w/ Manual Control Overview

J519 - Vehicle electrical system control module Control modules in front part of vehicle - Overview of Control Modules

J533 - Data bus on board diagnostic interface, in the left footwell, near the center console Control modules in front part of vehicle - Overview of Control Modules

T5 - 5-pin connector

T6k - 6-pin connector

T10k - 10-pin connector, behind the instrument panel, right Overview of connector stations and connectors

T16 - 16-pin connector, under the instrument panel, left

T20 - 20-pin connector

T20c - 20-pin connector

T52c - 52-pin connector

U31 - Diagnostic connection

V113 - Recirculation door motor Climatic (Manual Climate Control) A/C System w/ Manual Control Overview Diagrams

(A76) - K-diagnostic lead connection (in instrument panel wiring harness)

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B398) - Comfort system CAN bus high connection 2 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

(B407) - Comfort system CAN bus low connection 2 (in main wiring harness)

Previous Diagram 99/20 (Tracks 253-266)

Next Diagram 99/22 (Tracks 281-294)