Diagram 1/23 (Tracks 295-308)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument Cluster, Anti-Theft Immobilizer Control Module, Brake Pad Wear Indicator, Brake Fluid Level Warning Switch, Oil Pressure Indicator, Handbrake Warning





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

D2 - Anti-Theft Immobilizer Reading Coil

F1 - Oil Pressure Switch
Locations

F9 - Handbrake Warning Switch

F34 - Brake Fluid Level Warning Switch Locations

G34 - Left Front Brake Pad Wear Sensor

J285 - Instrument Cluster Control Module

J362 - Anti-Theft Immobilizer Control Module

J519 - Vehicle Electrical System Control Module Control modules in front part of vehicle - Overview of Control Modules

K2 - Generator (GEN) Warning Lamp

K3 - Oil Pressure Warning Lamp

K32 - Brake Pad Wear Indicator Lamp

K65 - Left Turn Signal Indicator Lamp

K94 - Right Turn Signal Indicator Lamp

K117 - Anti-Theft Immobilizer Warning Lamp

K118 - Brake System Warning Lamp

T14a - 14-Pin Connector, near battery Overview of connector stations and connectors

T32 - 32-Pin Connector

(B379) - Brake Wear Indicator Connection 1 (in main wiring harness)

(B380) - Brake Wear Indicator Connection 2 (in main wiring harness)

-^- - Only models with brake pad wear indicator

# - Not for engine code CCZB

## - Only engine code CCZB

Previous Diagram 1/22 (Tracks 281-294)

Next Diagram 1/24 (Tracks 309-322)