Trunk Lamp: Service and Repair

Luggage Compartment Lamp (W3)

Special tools, testers and auxiliary items required

• Trim Removal Wedge (VAS 3409)

• When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool ( (VAS 3409) , screwdriver) will be positioned, using commercially available adhesive tape.

Removal

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Pry lamp out from luggage compartment cover support using (VAS 3409) or screwdriver.






- Disconnect the connector - arrow - and remove the luggage compartment lamp.






Installation

Installation is performed in the reverse order of removal.