Diagram 67/9 (Tracks 99-112)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Throttle position sensor, Mass airflow sensor, Cylinder 4 internal pressure sensor, Throttle valve control module, Engine control module, Glow plug 4





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G69 - Throttle position sensor 2.5L CBTA and CBUA

G70 - Mass airflow sensor
Locations
[1][2]Air Flow Meter/Sensor

G623 - Cylinder 4 internal pressure sensor

J338 - Throttle valve control module
Locations
[1][2]Diagrams

J519 - Vehicle electrical system control module Control modules in front part of vehicle - Overview of Control Modules

J623 - Engine control module, in the center plenum chamber Control modules in front part of vehicle - Overview of Control Modules

Q13 - Glow plug 4

T4ca - 4-pin connector

T4ce - 4-pin connector

T5d - 5-pin connector

T14a - 14-pin connector, near the battery Overview of connector stations and connectors

T60 - 60-pin connector

T94 - 94-pin connector

(492) - Sensor ground connection 2 (in fuel injection system wiring harness)

(642) - Electronic fan control ground connection

(D128) - Connection (26) (in engine compartment wiring harness)

Previous Diagram 67/8 (Tracks 85-98)

Next Diagram 67/10 (Tracks 113-126)