Charge Air Hose Connections, With Connector Couplings

Charge Air Hose Connections, with Connector Couplings


The connector coupling seal can be damaged if the clip is in the locked position when installing. This would result in a leak. Follow the assembly instructions.

Removing

- Release the connector coupling by pulling the clip - 1 -. Remove the hose - 2 - without using a tool.






Installing

- When replacing the seal, place it in the groove in the charge air hose. Ensure the seal is completely seated in the groove all the way around.

- Oil the sealing surfaces of the seal.

- Bring the clip into the released position - 1 -.

- Slide the charge air hose onto the pipe as far as stop.

- Bring the clip into the locked position - 2 - and then press charge air hose back again.






- Check for correct seating and proper locking of the connector by pulling on the hose.