License Plate Holder

License Plate Holder

• The license plate holder can have different sizes depending on the market.

• The contour of the bumper cover determines the height of the license plate holder.

• Drill 12 mm holes.






With Holes

- Place the license plate holder - 2 - on the front bumper cover - 3 - and press the clips in - 1 -.

Without Holes

- Center the license plate holder - 2 - to the emblem - 4 - on the front bumper cover - 1 -.

- Set the drill stop depth to 12 mm and drill the holes.

- Place the license plate holder - 2 - on the front bumper cover - 3 - and press the clips in - 1 -.