Operation CHARM: Car repair manuals for everyone.

Left Power Seat Trim







Left Power Seat Trim

The following describes removing and installing on the left side of the vehicle. Removing and installing on the right side is identical.

Removing

- Switch off ignition.

- Press clamping pin - 1 - inward and remove the clip - 2 -.

- Pull rear trim - 3 - outward and then swing trim downward - arrow A -.

- Remove rear trim from seat.

- Pull front trim - 4 - upward and then swing trim outward - arrow B -.

- Push front trim toward rear - arrow C -.

- Remove front trim from seat and disconnect wiring harnesses from switches - 5 -.






Installing

- Install in reverse order of removal.