Diagram 109/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver door control module, Front passenger exterior rearview mirror turn signal bulb, Driver entry lamp in exterior rearview mirror, Driver automatic dimming exterior rearview mirror, Heated front passenger exterior rearview mirror





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J386 - Driver door control module Locations Driver Door Control Module -J386-

J387 - Front passenger door control module Control modules in front part of vehicle - Overview of Control Modules Front Pass Door Control Module -J387-

J519 - Vehicle electrical system control module Control modules in front part of vehicle - Overview of Control Modules

J533 - Data bus on board diagnostic interface Control modules in front part of vehicle - Overview of Control Modules

L132 - Front passenger exterior rearview mirror turn signal bulb

T2ad - Double connector, on the mirror

T3az - 3-pin connector

T16a - 16-pin connector

T16g - 16-pin connector

T20 - 20-pin connector

T20a - 20-pin connector

T20b - 20-pin connector

T28 - 28-pin connector, in the left A-pillar connector station Overview of connector stations and connectors

T28a - 28-pin connector, in the connector station, right A-pillar Overview of connector stations and connectors

W52 - Driver entry lamp in exterior rearview mirror

Y20 - Driver automatic dimming exterior rearview mirror

Z5 - Heated front passenger exterior rearview mirror

(206) - Ground connection (in front passenger door wiring harness)

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

* - Only for vehicles with automatic dimming exterior rearview mirror

*2 - Only for vehicles with high beam assist

Previous Diagram 109/6 (Tracks 57-70)

Next Diagram 109/8 (Tracks 85-98)