Front Interior Lamp (W1), With Anti-Theft Warning System

Front Interior Lamp (W1), With Anti-Theft Warning System

Special tools, testers and auxiliary items required

• Trim Removal Wedge (VAS 3409)

• The following illustrations show removing and installing the front interior lamp on a vehicle with a sunroof. Removing and installing the front interior lamp on a vehicle without a sunroof is identical.

• When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool ( (VAS 3409) , screwdriver) will be positioned, using commercially available adhesive tape.

Removal

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Pry off the trim - 1 - using a (VAS 3409) or a screwdriver at the tabs - arrows -.






- Remove both screws - arrows - and remove the interior lamp from the roof.






- Disconnect the connector - arrow - and remove the interior lamp.






Installation

Installation is performed in the reverse order of removal.