Diagram 72/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver seat belt switch, Front passenger seat belt switch, Front passenger seat occupant sensor, Airbag control module, Driver seat belt tensioner igniter 1, Front passenger seat belt tensioner igniter 1





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E24 - Driver seat belt switch Driver Seat Belt Switch -E24-

E25 - Front passenger seat belt switch Passive Occupant Detection System Front Pass Seat Belt Switch -E25-

G128 - Front passenger seat occupant sensor Passive Occupant Detection System

J234 - Airbag control module, behind the center console Control modules in front part of vehicle - Overview of Control Modules

J519 - Vehicle electrical system control module Control modules in front part of vehicle - Overview of Control Modules

N153 - Driver seat belt tensioner igniter 1 Locations Driver Seat Belt Tensioner Igniter 1 -N153-

N154 - Front passenger seat belt tensioner igniter 1 Locations Front Pass Seat Belt Tensioner Igniter 1 -N154-

T2q - Double connector, under the driver seat Overview of connector stations and connectors

T2y - Double connector, under the front passenger seat Overview of connector stations and connectors

T50 - 50-pin connector

(109) - Ground connection (in airbag wiring harness)

* - Only for vehicles with front passenger seat belt switch

*2 - Only for vehicles with front passenger passive occupant detection system

Previous Diagram 72/5 (Tracks 43-56)

Next Diagram 72/7 (Tracks 71-84)