Rear Suspension Overview

Rear Suspension Overview






I - Refer to => [ Subframe, Transverse Link and Tie Rod Assembly Overview ] Subframe, Transverse Link and Tie Rod Assembly Overview.

II - Refer to => [ Wheel Bearing Housing and Trailing Arm Assembly Overview ] Wheel Bearing Housing and Trailing Arm Assembly Overview.

III - Refer to => [ Shock Absorber and Coil Spring Assembly Overview ] Shock Absorber and Coil Spring Assembly Overview.

III - Refer to => [ Shock Absorber Assembly Overview, FWD ] Shock Absorber Assembly Overview, FWD.

IV - Refer to => [ Stabilizer Bar Assembly Overview ] Stabilizer Bar Assembly Overview.

• Welding and straightening work on supporting or wheel carrying components of suspension is not permitted.

• Always replace self-locking nuts.

• Always replace corroded bolts/nuts.

• Bonded rubber bushings can only be turned to a limited extent. Therefore tighten threaded connections at components with bonded rubber bushings only when wheel bearing housing has been lifted (curb weight position). Refer to => [ Rear Axle, Lifting to Curb Weight Position ] Rear Axle, Lifting to Curb Weight Position.