Instruments - Activating 2nd Vehicle Speed Display

90 10 01

January 28, 2010

2022590





Vehicle Information

Condition

Activating a Second Vehicle Speed Display on Instrument Cluster without Menu in Multifunction Display (MFD)

Technical Background

Vehicle speed can also be digitally displayed in "miles per hour" (mph) on the multi-function display. The owner's manual does not include this instruction.

Production Solution

Description included in owner's manual from week 12/2009.

Service

Activate the second vehicle speed display as follows:

1. Start the vehicle.

2. Press adjustment button A for clock three times, see illustration 1.








Tip:
When pressing the button the first time the hour display flashes (illustration. 2) when pressing the second time the minute display flashes (illustration. 3) and when pressing the third time the kilometer display flashes (illustration 4)

Tip:
When the kilometer display flashes, press reset button B to activate the second vehicle speed display. The display briefly appears in mph, and then switches to kilometers again. As the vehicle begins to move, the speed will display in mph instead of km. To switch OFF the second vehicle speed display, repeat point 1 to 3.

NOTE

In countries were the permanent display of the second speed is legally required, it cannot be switch OFF. For High-Line dash inserts (without menu in the MFD) follow the instructions of the owner's manual.

Warranty

Information only.

Required Parts and Tools

No Special Parts required.

No Special Tools required.

Additional Information

All part and service references provided in this Technical Bulletin are subject to change and/or removal. Always check with your Parts Dept. and Repair Manuals for the latest information.