Memory Systems - Incorrect Seat Memory Adjustment
72 10 02August 18, 2010
2023213
Vehicle Information
Condition
Update Programming, Gateway Control Module, Incorrect Seat Memory Adjustment
The seat memory does not move to the pre-set position after opening the door.
Technical Background
Incorrect software in the diagnosis interface (Gateway control module).
Production Solution
Software updated 2/2010.
Service
Update-Programming Procedure:
Tip:
To Update-Programming using SVM, review and follow instructions in Technical Bulletin Instance 2014603 "Software Version Management".
The SVM Process must be completed in its entirety so the database receives the update confirmation response. A warranty claim may not be reimbursed if there is no confirmation response to support the claim.
Note
^ Update the Engine Control Module using the SVM Unit code as listed in the table.
The procedure can be found in GFF under Functions/ Component Selection, Software Version Management, Adapting Software.
Tip:
The SVM Process must be completed in its entirety so the database receives the update confirmation response. A warranty claim may not be reimbursed if there is no confirmation response to support the claim or action is carried out that is not explicitly stated in the Technical Bulletin.
Ensure ECM/TCM Tuning Form has been completed and signed by customer as required in SVM Technical Bulletin Instance 2014603.
Warranty
Required Parts and Tools
No Special Parts required.
Additional Information
All part and service references provided in this Technical Bulletin are subject to change and/or removal. Always check with your Parts Dept. and Repair Manuals for the latest information.