Cellular Phone: Locations

Battery, Transmitter and Receiver Unit, Fuse and Wiring Harness Overview






1 - Positive Connection

• Red wire with suitable connection

2 - To Terminal 15a

• Connection to terminal 15a:

• Make sure the wire is secured.

• Fuse max. 15A

3 - Antenna Ground

• Make sure the ground is connected to the body properly

• Antenna location must be treated with suitable corrosion protection

4 - Transmitting/Receiving Antenna

• Installation locations, refer to => [ Rear Window Antenna Components Installed Locations Overview ] Rear Window Antenna Components Installed Locations Overview

5 - Shielded Antenna Wire

• Wire with coaxial connector

6 - Telephone Or Two-Way Radio Transmitter/Receiver Unit

7 - Wiring Harness

• Voltage supply positive via read wire, 2.5 mm2 cross section.

• Voltage supply negative via brown wire, 2.5 mm2 cross section.

• If necessary, wire to terminal 15a via black wire 1.5 mm 2 cross section.

8 - Fuse Holder

• Install next to battery.

9 - To Starter

10 - Battery

• Installation location in engine compartment.

11 - Negative Wire

12 - Body Ground