Diagram 56/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Compass magnetic field sensor, Voltage stabilizer, Data bus on board diagnostic interface, Fuse 48 (on fuse panel C)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G197 - Compass magnetic field sensor Anti-Theft System

J519 - Vehicle electrical system control module Control modules in front part of vehicle - Overview of Control Modules

J532 - Voltage stabilizer Control modules in front part of vehicle - Overview of Control Modules

J533 - Data bus on board diagnostic interface, in the left footwell, near the center console Control modules in front part of vehicle - Overview of Control Modules

J682 - Terminal 50 power supply relay Overview Of Relay Carrier

J907 - Starter relay 2 Overview Of Relay Carrier

SC48 - Fuse 48 (on fuse panel C) Fuse overview (SA), (SB), (SC)

T8ao - 8-pin connector

T10ah - 10-pin connector

T20 - 20-pin connector

T52b - 52-pin connector

T52c - 52-pin connector

(45) - Ground connection behind instrument panel, center

(47) - Ground connection in right front footwell Overview Of Ground Connections in Interior

(366) - Ground connection 1 (in main wiring harness)

(369) - Ground connection 4 (in main wiring harness)

(431) - Ground connection 2 (in roof wiring harness)

(A178) - Infotainment CAN bus high connection (in instrument panel wiring harness)

(A179) - Infotainment CAN bus low connection (in instrument panel wiring harness)

(A225) - Infotainment CAN bus high connection 2 (in instrument panel wiring harness)

(A226) - Infotainment CAN bus low connection 2 (in instrument panel wiring harness)

(B320) - Positive connection 6 (30a) (in main wiring harness)

(B321) - Positive connection 7 (30a) (in main wiring harness)

(B660) - Diagnostic terminal 50 connection (in main wiring harness)

* - Only for vehicles with Start/Stop system

*2 - Only for vehicles without Start/Stop system

Previous Diagram 56/2 (Tracks 1-14)