Diagram 64/10 (Tracks 113-126)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Fuse 7 (on fuse panel B), Fuse 9 (on fuse panel B), Fuse 11 (on fuse panel B), Fuse 12 (on fuse panel B), Oxygen sensor heater, Heater for oxygen sensor 1 after catalytic converter





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

N75 - Wastegate bypass regulator valve
Locations
[1][2]Diagrams

N80 - EVAP canister purge regulator valve 1
Locations
[1][2]Canister Purge Control Valve

N249 - Turbocharger recirculation valve
Locations
[1][2]Diagrams

N276 - Fuel pressure regulator valve
Locations
[1][2]Diagrams

SB6 - Fuse 6 (on fuse panel B) Fuse overview (SA), (SB), (SC)

SB7 - Fuse 7 (on fuse panel B) Fuse overview (SA), (SB), (SC)

SB8 - Fuse 8 (on fuse panel B) Fuse overview (SA), (SB), (SC)

SB9 - Fuse 9 (on fuse panel B) Fuse overview (SA), (SB), (SC)

SB10 - Fuse 10 (on fuse panel B) Fuse overview (SA), (SB), (SC)

SB11 - Fuse 11 (on fuse panel B) Fuse overview (SA), (SB), (SC)

SB12 - Fuse 12 (on fuse panel B) Fuse overview (SA), (SB), (SC)

T4v - 4-pin connector

T6w - 6-pin connector

T14a - 14-pin connector Overview of connector stations and connectors

T26 - 26-pin connector

T40 - 40-pin connector

Z19 - Oxygen sensor heater Exhaust System Overview Heated Oxygen Sensor -G39- / Oxygen Sensor Heater -Z19-

Z29 - Heater for oxygen sensor 1 after catalytic converter Oxygen Sensor After Converter -G130- / Heater For Oxygen Sensor 1 After Converter -Z29-

(D189) - Connection (87a) (in engine wiring harness)

Previous Diagram 64/9 (Tracks 99-112)

Next Diagram 64/11 (Tracks 127-140)