Front Side Marker Lamp Bulb

Front Side Marker Lamp Bulb

• It is not necessary to disconnect the battery ground cable.

• Illustrations show removal and installation of left Front side marker lamp bulb (M11).

• Removing and installing the right front side marker lamp bulb is identical.

Removal

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Remove the front side marker lamp. Refer to => [ Front Side Marker Lamp ] Front Side Marker Lamp.

- Remove the bulb from the bulb socket.






Bulb: 12V, W3W

Installation

Install in reverse order of removal, noting the following:

• When installing the bulb socket, pay attention to the housing; the openings under the rubber seal must align with the tabs on the housing.

- Make sure the side marker lamp works correctly.