Brake/Tail Lamp and Turn Signal Lamp, Bulbs

Brake/Tail Lamp and Turn Signal Lamp, Bulbs

• Illustrations depict removal and installation of the left side. Removal and installation of the right side is performed symmetrically.

• The tail lamp assembly inside the side panel has a single filament bulb, in addition to the yellow turn signal bulb, which services as both a brake lamp and a tail lamp.

Removal

- Remove the bulb carrier for the side panel tail lamp. Refer to => [ Side Panel Tail Lamp Bulb Holder ] Side Panel Tail Lamp Bulb Holder.

- Pull the brake lamp/tail lamp bulb - 1 - or the turn signal bulb - 2 - out of the bulb holder.






Brake lamp/tail lamp bulb:12V, W16W

Turn signal bulb: bulb 12V, WY21W

Installation

Install in reverse order.