Ribbed Belt Overview
Ribbed Belt Overview
1 Bolt
• 25 Nm
2 Bolt
• 25 Nm
3 Generator
• To make it easier to position the generator, drive the threaded bushing for the generator bolt back slightly.
4 Bolt
• 25 Nm
5 Lower Idler Pulley with Bracket
• For the Air Conditioning (A/C) compressor ribbed belt.
• Do not remove the pulley.
6 Bolt
• 25 Nm
7 A/C Compressor
8 Bolt
• 25 Nm
9 Coolant Pump
• In the cylinder block.
• Removing and installing, refer to => [ Coolant Pump ] Service and Repair.
10 Ribbed Belt, Generator, Power Steering Pump and Coolant Pump
• Belt routing, refer to => [ Belt Routing ].
• Before removing, mark the rotation direction using chalk or a felt tip pen.
• Check for wear.
• Do not kink.
• Removing and installing, refer to => [ Ribbed Belt ] Ribbed Belt.
11 Ribbed Belt, A/C Compressor
• Belt routing, refer to => [ Belt Routing ].
• Before removing, mark the rotation direction using chalk or a felt tip pen.
• Check for wear.
• Do not kink.
• Removing and installing, refer to => [ Ribbed Belt ] Ribbed Belt.
12 Vibration Damper
• To remove and install, lock the crankshaft. Refer to => [ Crankshaft, Locking ] Procedures.
13 Bolt
• 50 Nm + an additional 90° (1/4 turn).
• Always replace.
• Only use strength category 10.9 bolts.
• Quantity: 5
14 Bushing
• Quantity: 2
15 Ribbed Belt Tensioner, A/C Compressor Belt
• 35 Nm
• Do not remove the tensioning roller, remove the entire tensioner. Refer to => [ Ribbed Belt Tensioner, A/C Compressor ] Ribbed Belt Tensioner, A/C Compressor.
16 Ribbed Belt Tensioner, Generator, Power Steering Pump and Coolant Pump Belt
• 35 Nm
• Do not remove the tensioning roller, remove the entire tensioner. Refer to => [ Ribbed Belt Tensioner, Generator, Power Steering Pump and Coolant Pump ] Ribbed Belt Tensioner, Generator, Power Steering Pump and Coolant Pump.
17 Bolt
• 25 Nm
18 Bolt
• 8 Nm
19 Upper Idler Pulley with Bracket
• For the generator, power steering pump and coolant pump ribbed belt.
• Do not remove the pulley.
20 Bolt
• 40 Nm + an additional 90° (1/4) turn.
21 Engine Mount
22 Bushing
• Quantity: 2
23 Accessory Bracket
Belt Routing
1. Upper idler pulley
2. Generator
3. Lower idler pulley
4. Ribbed belt, generator, power steering pump and coolant pump
5. A/C compressor
6. Ribbed belt, A/C compressor
7. Vibration damper
8. Belt tensioner, A/C compressor ribbed belt
9. Belt tensioner, generator, power steering pump and coolant pump ribbed belt
10. Coolant pump