Instruments - Compass Reading Is Incorrect
91 12 03February 10, 2012
2027084 *Supersedes T.B. V911119 to include additional model year applicability.*
Compass Reading Incorrect (Excludes Navigation Radio Equipped Vehicles)
Vehicle Information
Condition
An incorrect compass reading can be attributed to the following:
^ Incorrect orientation of the compass module.
^ Compass not properly coded to the correct zone.
Production Solution
Not applicable
Service
Procedure
^ Lower the rear headliner and inspect for loose mounting pad (hook and loop tape) on compass module.
^ If module is loose continue with procedure.
^ If module is not loose, fit headliner and see Setting Compass Zone.
^ Remove protective backing from hook and loop tape.
^ Attach tape to the compass module.
^ Attach tape to roof.
^ Install module. Make sure it is properly attached and it has the correct orientation as shown.
Setting Compass Zone
Set the compass zone according to the chart shown.
Warranty
Required Parts and Tools
No special tools required.
Additional Information
All part and service references provided in this Technical Bulletin are subject to change and/or removal. Always check with your Parts Dept. and Repair Manuals for the latest information.