Sealing Flange and Drive Plate/Flywheel Overview

Sealing Flange and Drive Plate/Flywheel Overview






1 Vibration Damper

• There are different versions.

2 Bolts

• 50 Nm + an additional 90° (1/4) turn.

• Always replace.

• Use a strength category 10.9 bolt only.

• Quantity: 5

3 Bolt

• 10 Nm

4 Sealing Flange, Belt Pulley Side

• With an integrated seal.

• Removing and installing, refer to => [ Sealing Flange, Belt Pulley Side ] Service and Repair.

5 Cylinder Block

6 Bolt

• 60 Nm + an additional 90° (1/4) turn.

• Always replace.

7 Drive Plate/Flywheel

• To remove, lock the crankshaft using the locking pin (T40069).

• The flywheel must not be pried out or the sealing flange will be damaged.

• Drive plate removing and installing. Refer to => [ Drive Plate ] Drive Plate.

• Flywheel removing and installing, refer to => [ Flywheel ] Flywheel.

8 Sensor Wheel

• For the engine speed sensor.

• With a position holder.

9 Seal, Transmission Side

• Removing and installing, refer to => [ Seal, Transmission Side ] Seal, Transmission Side.

10 Sealing Flange, Transmission Side

• Removing and installing, refer to => [ Sealing Flange, Transmission Side ] Service and Repair.

11 O-ring

• Always replace.

12 Bolt

• 25 Nm

13 Alignment Sleeves

14 Bolt

• 5 Nm

15 Engine Speed Sensor (G28)

16 Seal

• Always replace.