Reverse Shaft

Reverse Shaft

Special tools, testers and auxiliary items required

• Thrust Tube (VW 454)

• Thrust Pad (VW 447 h)

• Punch (VW 411)

• Centering Mandrel (12-551)

• Thrust Plate (VW 401)

• Punch (VW 408 A)

• Kukko Extractor 14.5-18.5 mm (21/2)

• Kukko Support (22/1)

Removing the Needle Sleeve from the Clutch Housing





A Counter support, for example, Kukko support (22/1)
B Internal puller 14.5 to 18.5 mm, for example, Kukko extractor 14.5-18.5 mm (21/2)

• The needle sleeve will get damaged when it is removed and must be replaced.

Installing the Needle Sleeve - A - into the Clutch Housing





Removing the Needle Sleeve from the Reverse Gear Shaft Support





Installing the Needle Sleeve into the Reverse Gear Shaft Support