Retainer and Power Seat Bracket

Retainer and Power Seat Bracket

• The following describes removing and installing the left seat. Removing and installing the right seat is identical.

Removing

- Switch off the ignition.

- Remove left power seat trim. Refer to => [ Power Seat Trim, Left ] Power Seat Trim, Left.

- Remove bolts - 1 - (3.5 Nm) and remove bracket - 2 - from seat frame.

- Remove two bolts - 3 - (3.5 Nm) and remove bracket - 4 - and spacer pipe - 5 - from seat frame.






Installing

- Install in reverse order of removal.