Diagram 35/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Left front brake pad wear sensor, Instrument cluster control module, Vehicle electrical system control module, Data bus on board diagnostic interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F47 - Brake pedal switch Locations [1][2]Brake Light Switch

G34 - Left front brake pad wear sensor Locations

J234 - Airbag control module Locations

J285 - Instrument cluster control module

J519 - Vehicle electrical system control module

J527 - Steering column electronics control module Locations Locations Steering Column Electronics Control Module -J527-

J533 - Data bus on board diagnostic interface, in the left footwell, near the center console Locations

T2y - Double connector

T4y - 4-pin connector

T16 - 16-pin connector

T20 - 20-pin connector

T20d - 20-pin connector

T32c - 32-pin connector

T52b - 52-pin connector

T52c - 52-pin connector

T75 - 75-pin connector

(373) - Ground connection 8 (in main wiring harness)

(382) - Ground connection 17 (in main wiring harness)

(B379) - Brake wear indicator connection 1 (in main wiring harness)

(B380) - Brake wear indicator connection 2 (in main wiring harness)

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

* - Diagnostic connector

*2 - Refer to applicable airbag wiring diagram

Previous Diagram 35/5 (Tracks 43-56)

Next Diagram 35/7 (Tracks 71-84)