Diagram 115/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Center vent temperature sensor, A/C control module, A/C compressor regulator valve





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E30 - A/C switch

E94 - Heated driver seat adjuster

E95 - Heated front passenger seat adjuster

E230 - Rear window defogger button

F34 - Brake fluid level warning switch

G59 - Heated driver seat temperature sensor Heated Driver Seat -G59- / -Z6- / -Z31-

G191 - Center vent temperature sensor Pass Compartment A/C and Heating System Center Vent Temperature Sensor -G191-

J301 - A/C control module, in the engine compartment, right Pass Compartment A/C and Heating System A/C Control Module -J301-

J400 - Wiper motor control module

J774 - Front seat heating control module Diagrams

K10 - Rear window defogger indicator lamp

N280 - A/C compressor regulator valve Engine Compartment A/C System [1][2]Diagrams

T2v - Double connector

T4p - 4-pin connector

T4t - 4-pin connector

T8v - 8-pin connector

T10a - 10-pin connector, under the driver seat

T20c - 20-pin connector

(376) - Ground connection 11 (in main wiring harness)

(381) - Ground connection 16 (in main wiring harness)

(655) - Ground connection on left headlamp Locations

(M45) - Connection 5 (in driver seat wiring harness)

* - Only for vehicles with an auxiliary heater

Previous Diagram 115/5 (Tracks 43-56)

Next Diagram 115/7 (Tracks 71-84)