Diagram 28/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Fresh air blower switch, A/C control module, Fresh air blower series resistor with fuse, Fresh air blower





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E9 - Fresh air blower switch

E256 - ASR/ESP button [1][2]Diagrams

J301 - A/C control module, in the engine compartment, right Pass Compartment A/C and Heating System A/C Control Module -J301-

J485 - Auxiliary heater operation relay

J527 - Steering column electronics control module Locations Locations Steering Column Electronics Control Module -J527-

J533 - Data bus on board diagnostic interface Locations

N24 - Fresh air blower series resistor with fuse Pass Compartment A/C and Heating System Diagrams

T4r - 4-pin connector

T5 - 5-pin connector

T6ad - 6-pin connector

T10k - 10-pin connector, on the heater

T20 - 20-pin connector

T20c - 20-pin connector

T20d - 20-pin connector

V2 - Fresh air blower Pass Compartment A/C and Heating System Diagrams

(44) - Ground connection on A-pillar, lower left

(47) - Ground connection in right front footwell

(372) - Ground connection 7 (in main wiring harness)

(375) - Ground connection 10 (in main wiring harness)

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

(L5) - Connection 1 (in A/C unit wiring harness)

(L6) - Connection 2 (in A/C unit wiring harness)

* - Only for vehicles with auxiliary coolant heater

Previous Diagram 28/5 (Tracks 43-56)