Undamaged Window, Preparing for Glazing

Undamaged Window, Preparing for Glazing

Adhesive Bead, Cutting

• When re-using an undamaged window, cut back remaining adhesive sealant to 1 to 2 mm shortly before re-adhering, do not damage primer and ceramic coating.






• The remaining material serves as a base for the new adhesive sealant being applied.


Do not prime the adhesive surface or use a cleaning solution on it. Keep the adhesive surface free of dirt and grease.

Exception: If bonding is not performed immediately after cutting back, the remaining material must be activated using the activator D 181 801 A1.