Fuel Tank Lid Unlock Motor

Fuel Tank Lid Unlock Motor

Removing






- Remove the service cover - 2 - from the right luggage compartment side trim panel - 1 -.

- Loosen the luggage compartment right side trim panel - 1 - and pull it forward slightly but do not remove.

Reach through the opening in the service cover - 2 - and disconnect the connector - 4 - from the Fuel Tank Lid Unlock Motor (V155) - 3 -.






- Remove the fuel filler door unit. Refer to => [ Fuel Filler Door Unit ] Fuel Filler Door Unit.

- Press the rubber grommet - 3 - out of the side panel and remove the wiring harness - 2 -.

- Remove the Fuel Tank Lid Unlock Motor (V155) - 4 - from the side panel in the - direction of the arrow -.

Installation

To install, perform the steps used for removal in reverse order.

- Make sure the grommet and the connector fit correctly.

- Secure the luggage compartment right side trim.