Parking Lamp Bulb

Parking Lamp Bulb

• It is not necessary to remove the headlamp when replacing the headlamp bulb.

• The following illustrations show replacing a bulb in a left headlamp.


• Turn off the ignition and all electrical consumers.

• Remove the key.

Removal

- Remove the cap - 1 -.






- Remove the bulb socket - 1 - and left side marker lamp bulb (M1) from the reflector to the rear.






- Remove the left side marker lamp bulb - 2 - from the bulb socket - 1 - in - direction of arrow -.






Bulb: glass base bulb 12 V/5 W

Installation


• Do not touch the glass of the light bulb, when installing. Fingers will leave traces of grease on the glass which, when the light is switched on, will evaporate and cloud the glass.

• When installing cap, ensure proper seating. It is destroyed by entry of water into headlamp.

Installation is performed in the reverse order of removal. Note the following:

- Check headlamp for functions.