Rear Lid Handle Unlock Switch

Rear Lid Handle Unlock Switch

Removing

- Remove the rear lid trim.

Vehicles with rearview camera system:

- Remove the switch with the rearview camera.

Vehicles without rearview camera system:

- Disconnect the connector - 4 - on the switch connection - 2 -.






- Remove the two nuts - 3 - from the switch threaded pin and remove the cover piece - 1 - upward.

- Remove the button - 2 - from the rear lid.

The rear lid can be opened using the emergency release in the lock if there is an electrical malfunction. Refer to => [ Hood Lock ] Hood Lock. The emergency release is reached through an opening in the rear lid trim panel.

Installation

To install, perform the steps used for removal in reverse order.

Tightening specification for the nuts: 8 Nm

• Perform a function test on the unlocking components before closing the rear lid.