Exterior rearview mirror

Exterior rearview mirror

• The following describes removing and installing the left exterior mirror. Removing and installing the right exterior mirror is identical.

Removing

- Remove front driver side door trim.

- Remove the cable bracket - 2 - and disconnect the connector - 1 - for the exterior rearview mirror.






- Pry cover cap - 3 - out of door and remove bolts - 2 -.






- Remove the exterior rearview mirror - 1 - and guide wire through the opening in the door.

Installation

To install, perform the steps used for removal in reverse order.

Tightening specifications of bolts for rearview mirror: 8 Nm

Check the window function before installing the door trim.