Power Seat Pan

Power Seat Pan

The following describes removing and installing the lower seat frame on a left front seat. Removal and installation of the right seat pan is performed in the same way.

Removing

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Remove front seat. Refer to => [ Front Seat ] Front Seat.

- Attach the seat to the fixture for seat repair (VAS 6136).

- Remove right trim on seat. Refer to => [ Right Seat Trim ] Right Seat Trim.

- Remove left power seat trim. Refer to => [ Power Seat Trim, Left ] Power Seat Trim, Left.

- Remove retainer and power seat bracket. Refer to => [ Retainer and Power Seat Bracket ] Retainer and Power Seat Bracket.

- If present, remove the front seat drawer mount. Refer to => [ Seat Drawer Mount ] Seat Drawer Mount.

- Remove front seat backrest. Refer to => [ Left Front Seat Backrest ] Left Front Seat Backrest.

- Remove the cover and upholstery from the front seat backrests. Refer to => [ Front Seat Pan Covers and Upholstery ] Front Seat Pan Covers and Upholstery

- Remove screws - 1 - and - 2 - on right side.

- Remove screw - 3 - in rear area.

• Screw - 3 - in installation position points from inside toward outside.

- Remove screw - 4 - in front area.

- Remove seat pan - 5 - from longitudinal adjuster - 6 -.






Installing

- Install in reverse order of removal.

If the seat pan present is replaced, the new part is a seat pan with brackets - 1 - and - 2 -. If brackets - 1 - and - 2 - are not present on the removed seat pan, they must be removed on the new one.

To avoid contamination, seat tracks - 3 - and - 4 - must be covered with a cloth when removing brackets - 1 - and - 2 -.