Interior Monitoring and Vehicle Inclination Deactivation Switch (E267)/(E360)

Interior Monitoring and Vehicle Inclination Deactivation Switch (E267)/(E360)

Special tools, testers and auxiliary items required

• Trim Removal Wedge (VAS 3409)

The Interior Monitoring Deactivation Switch (E267) / Deactivate Vehicle Inclination Sensor Button (E360) are installed together in one unit in the lower B-pillar trim.

As of MY 07, the shape of the switch changed.


• Turn off the ignition and all electrical consumers.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (VAS 3409) , screwdriver) will be positioned using commercially available adhesive tape.

Removal

- Unclip the switch - 1 - from the trim using the (VAS 3409).






- Release and disconnect the harness connector - arrow -.






Installation

Install in reverse order of removal.