Diagram 42/32 (Tracks 421-434)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Vehicle electrical system control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G130 - Oxygen sensor after three way catalytic converter Locations Oxygen Sensor After Converter -G130- / Heater For Oxygen Sensor 1 After Converter -Z29-

G465 - Oxygen sensor in bank 1 center three way catalytic converter Locations Oxygen Sensor in Bank 1 Center Three way Catalytic Converter -G465- / Oxygen Sensor 3 Heater -Z62-

J299 - Secondary air injection pump relay

J519 - Vehicle electrical system control module Locations

N112 - Secondary air injection solenoid valve Locations [1][2]Air Injection Control Valve

SB15 - Fuse 15 (on fuse panel B) Locations

SB23 - Fuse 23 (on fuse panel B) Locations

T3d - 3-pin connector

T4ao - 4-pin connector

T4v - 4-pin connector

T14a - 14-pin connector

T40 - 40-pin connector

V144 - Leak detection pump Locations [1][2]Diagrams

(E7) - Connection (87a) (in Motronic multiform fuel injection wiring harness)

(E30) - Connection (87a) (in engine wiring harness)

Previous Diagram 42/31 (Tracks 407-420)

Next Diagram 42/33 (Tracks 435-448)