Diagram 42/33 (Tracks 435-448)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Vehicle electrical system control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G39 - Heated oxygen sensor Locations Heated Oxygen Sensor -G39- / Oxygen Sensor Heater -Z19-

G108 - Heated oxygen sensor 2 Locations

G130 - Oxygen sensor after three way catalytic converter Locations Oxygen Sensor After Converter -G130- / Heater For Oxygen Sensor 1 After Converter -Z29-

G465 - Oxygen sensor in bank 1 center three way catalytic converter Locations Oxygen Sensor in Bank 1 Center Three way Catalytic Converter -G465- / Oxygen Sensor 3 Heater -Z62-

J519 - Vehicle electrical system control module Locations

SB21 - Fuse 21 (on fuse panel B) Locations

T1ni - Single connector

T1nj - Single connector

T4ao - 4-pin connector

T4v - 4-pin connector

T6af - 6-pin connector

T6w - 6-pin connector

T40 - 40-pin connector

T52b - 52-pin connector

W31 - Left front entry lamp

W32 - Right front entry lamp

(E30) - Connection (87a) (in engine wiring harness)

(R56) - Entry lamp connection (in driver door wiring harness)

Previous Diagram 42/32 (Tracks 421-434)

Next Diagram 42/34 (Tracks 449-462)