Diagram 42/38 (Tracks 505-518)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Vehicle electrical system control module, Engine control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G28 - Engine speed sensor Locations [1][2]Diagrams

G40 - Camshaft position sensor Locations [1][2]Camshaft Position Sensor

G61 - Knock sensor 1 Locations Knock Sensor 1 -G61-

G69 - Throttle position sensor 2.5L CBTA and CBUA

G81 - Fuel temperature sensor 2.0L CJAA TDI [1][2]Diagrams

G212 - EGR potentiometer 2.0L CJAA TDI EGR Vacuum Regulator Solenoid Valve -N18- / EGR Potentiometer -G212-

G247 - Fuel pressure sensor Locations [1][2]Diagrams

G581 - Charge pressure actuator position sensor 2.0L CJAA TDI Charge Pressure Actuator Position Sensor -G581-

J519 - Vehicle electrical system control module Locations

J623 - Engine control module

T6ak - 6-pin connector

T6at - 6-pin connector

T60 - 60-pin connector

(D103) - Connection (3) (in engine compartment wiring harness)

(D104) - Positive connection 2 (30a) (in engine compartment wiring harness)

Previous Diagram 42/37 (Tracks 491-504)

Next Diagram 42/39 (Tracks 519-532)