Diagram 114/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Oil pressure/temperature sensor, All wheel drive control module, Haldex clutch control valve, Haldex clutch pump





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F - Brake lamp switch Locations [1][2]Brake Light Switch

G437 - Oil pressure/temperature sensor

J104 - ABS control module Locations [1][2]Diagrams

J492 - All wheel drive control module

J533 - Data bus on board diagnostic interface Locations

M4 - Left tail lamp bulb

N373 - Haldex clutch control valve

T4y - 4-pin connector

T5o - 5-pin connector

T6bt - 6-pin connector

T20 - 20-pin connector

T47 - 47-pin connector

V181 - Haldex clutch pump

(369) - Ground connection 4 (in main wiring harness)

(662) - Ground connection in left rear side panel

(B131) - Connection (54) (in interior wiring harness)

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

Previous Diagram 114/2 (Tracks 1-14)

Next Diagram 114/4 (Tracks 29-42)