Diagram 216/35 (Tracks 463-476)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Power Supply and Plus Connection (in wiring harness)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G40 - Camshaft Position (CMP) Sensor Locations

G336 - Intake Manifold Runner Position Sensor 2.0L BPY, CCTA and CBFA

J519 - Vehicle Electrical System Control Module Locations Locations

J623 - Engine Control Module (ECM) Locations

N70 - Ignition Coil 1 with Power Output Stage Locations

N127 - Ignition Coil 2 with Power Output Stage Locations

N291 - Ignition Coil 3 with Power Output Stage Locations

N292 - Ignition Coil 4 with Power Output Stage Locations

N323 - Ignition Coil 5 with Power Output Stage Locations

SB14 - Fuse 14 (on fuse panel B)

T3q - 3-Pin Connector

T4af - 4-Pin Connector

T4ag - 4-Pin Connector

T4ah - 4-Pin Connector

T4ai - 4-Pin Connector

T4aj - 4-Pin Connector

T14a - 4-Pin Connector

T40 - 40-Pin Connector

T60 - 60-Pin Connector

(D20) - Connection (87a) (in front right wiring harness)


- Component Location: In engine compartment wiring harness between N127 - Ignition Coil 2 with Power Output Stage and N291 - Ignition Coil 3 with Power Output Stage

(D35) - Plus Connection 1 (15a) (in engine pre-wiring wiring harness)


- Component Location: In main wiring harness between G83 - Engine Coolant Temperature (ECT) Sensor (on Radiator) and G28 - Engine Speed (RPM) Sensor

Previous Diagram 216/34 (Tracks 449-462)

Next Diagram 216/36 (Tracks 477-490)