Diagram 604/31 (Tracks 407-420)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Power and signal splices





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G299 - Intake Air Temperature (IAT) Sensor 2 2.0L BPY, CCTA and CBFA

J299 - Secondary Air Injection (AIR) Pump Relay

J519 - Vehicle Electrical System Control Module Locations

J623 - Engine Control Module (ECM)

N112 - Secondary Air Injection (AIR) Solenoid Valve Locations

SB23 - Fuse 23 (on fuse panel B)

T3d - 3-Pin Connector

T14a - 14-Pin Connector

T40 - 40-Pin Connector

T121 - 121-Pin Connector

V144 - Leak Detection Pump (LDP) Locations

(D106) - Connection 4 (in engine compartment wiring harness)


- Location: In wiring circuit between main wiring harness and J623 - Engine Control Module (ECM)

(E7) - Connection (87a)(in Motronic wiring harness)


- Location: In wiring circuit between main wiring harness and T14a connection in engine compartment wiring harness

1) - Through June 2007

Previous Diagram 604/30 (Tracks 393-406)

Next Diagram 604/32 (Tracks 421-434)