Diagram 251/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver's and Front Passenger's Safety Belt Switch, Driver's and Front Passenger's Rear Side Airbag Crash Sensor, Airbag Control Module, Driver's and Front Passenger's Safety Belt Tensioner Igniter 1, Driver's and Front Passenger's Head Curtain Airbag Igniter





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E24 - Driver's Safety Belt Switch

E25 - Front Passenger's Safety Belt Switch

G256 - Rear Side Airbag Crash Sensor (on driver's side) Locations

G257 - Rear Side Airbag Crash Sensor (on front passenger's side) Locations

J234 - Airbag Control Module Locations Locations

J519 - Vehicle Electrical System Control Module Locations Locations

N153 - Driver's Safety Belt Tensioner Igniter 1 Locations

N154 - Front Passenger's Safety Belt Tensioner Igniter 1 Locations

N251 - Driver's Head Curtain Airbag Igniter Airbag Component Locations

N252 - Front Passenger's Head Curtain Airbag Igniter Airbag Component Locations

T2j - Double Connector, yellow, in front left footwell

T2k - Double Connector, yellow, in front right footwell

T2aa - Double Connector, yellow, below driver's seat

T2ab - Double Connector, yellow, below front passenger's seat

T3m - 3-Pin Connector

T3n - 3-Pin Connector

T3o - 3-Pin Connector

T3p - 3-Pin Connector

T75 - 75-Pin Connector on J234

(109) - Ground Connection (in airbag wiring harness)

Previous Diagram 251/6 (Tracks 57-70)

Next Diagram 251/8 (Tracks 85-98)