Headlamp Washer Pump: Service and Repair

Headlamp Washer Pump (V11)

The headlamp washer pump is installed at tank for windshield washing system and headlamp cleaning system in right wheel housing.


• Turn off the ignition and all electrical consumers.

• Remove the key.

Removal

- Remove the front bumper cover.

- Pull the headlamp washer pump - 9 - out of the reservoir.






- Disconnect the connector - 10 -.

- To disassemble connecting tube - 8 -, pull securing clip at connection and pull connecting tube - 8 - from headlamp washer pump.

Installation

Installation is performed in the reverse order of removal. Note the following:

- Tighten the threaded connections to the tightening specification. Refer to => [ Headlamp Washer System Overview ] Headlamp Washer System Overview.

- Bleed the headlamp washer system. Refer to=> [ Headlamp Washer System, Bleeding ] Headlamp Washer System, Bleeding.