Front Interior Lamp Bulb

Front Interior Lamp Bulb

Special tools, testers and auxiliary items required

• Trim Removal Wedge (VAS 3409)


• Turn off the ignition and all electrical consumers.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (VAS 3409) , screwdriver) will be positioned using commercially available adhesive tape.

Removal

- Carefully remove the front interior lamp lens using the (VAS 3409) - arrow -.






- Push the contact plate - 1 - on the front interior lamp to the side - arrow - and remove the bulb - 2 - with the contact plate from the front interior lamp.






- Remove the contact plate - arrow - from the faulty bulb.






Bulbs: tubular bulb 12 V/10 W


• Do not touch the glass of the light bulb, when installing. Your fingers will leave traces of grease on the glass which, when the light is switched on, will evaporate and cloud the glass.

Installation

Install in reverse order of removal.