Front Passenger Door Window Regulator Switch (E107)

Front Passenger Door Window Regulator Switch (E107)

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)

• The push button illumination (L76) is integrated in the front passenger door window regulator switch and cannot be replaced separately.


• Turn off the ignition and all electrical consumers.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (VAS 3409) , screwdriver) will be positioned using commercially available adhesive tape.

Removal

- Remove the upper section of the handle well from the pull handle.

- Release and disconnect the harness connector - arrow -.






- Open the four tabs - arrows - and remove the front passenger door window regulator switch.






Installation

Install in reverse order of removal.

- When installing, make sure the four tabs audibly engage (click).