Without Multi-Function Display (MFD)

Service Interval Display, Resetting Using Buttons on Instrument Cluster





- With ignition on, multifunction display shows a "wrench" symbol in the display






- With the ignition switched off, hold the "0.0 button pressed.
- Switch ignition on.





- Release the button "0.0" then press the "MIN" button.
- Turn ignition off





The Service Interval Display is now reset .


Note:
A flexible interval can only be calculated for the next service if the Service Interval Display is reset using VAS 5051 / 5052, VAG 1551/52 or the Vehicle Diagnosis Tester.

Reseting indicator via the instrument cluster will result in setting to a fixed service interval value of 1 year / 15,000 km (10,000 miles).

Do not reset the display between service intervals. Doing so will result in an incorrect display.

The service display information will remain intact even if the battery is disconnected.

If a priority 1 malfunction is detected (red symbol), you cannot display the distance remaining.