Operation CHARM: Car repair manuals for everyone.

Diagram 604/27 (Tracks 351-364)






IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Power and signal splices





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G44 - Right Rear ABS Wheel Speed Sensor Locations

G47 - Left Front ABS Wheel Speed Sensor Locations

J104 - ABS Control Module Locations

J519 - Vehicle Electrical System Control Module Locations

T26a - 26-Pin Connector

T47 - 47-Pin Connector

(D149) - Connection (speed sensor rear, right -) (in engine compartment wiring harness)


- Location: In main wiring harness between wiring circuits for N201 - Rear Passenger's Side Airbag (driver's side) Igniter and N202 - Rear Passenger's Side Airbag (front passenger's side) Igniter 1)


- Location: In main wiring harness between wiring circuits for G45 - Right Front ABS Wheel Speed Sensor and G257 - Rear Side Airbag Crash Sensor (on front passenger's side) 2)

(D184) - Left Front Speed Sensor + Connection (in engine wiring harness)


- Location: In main wiring harness between wiring circuits for Data link Connector and connector T28 at left A-pillar

1) - Through June 2007

2) - From July 2007

Previous Diagram 604/26 (Tracks 337-350)

Next Diagram 604/28 (Tracks 365-378)