Diagram 10/10 (Tracks 113-126)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Switch for emergency flasher, Back-Up Light Switch, Vehicle Electrical System Control Module, Data Bus On Board Diagnostic Interface, Indicator light for emergency flasher system





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E229 - Switch for emergency flasher

F4 - Back-Up Light Switch Direct Shift Gearbox 02E (DSG)

J386 - Door control module, driver side Locations

J387 - Door control module, passenger side Locations Central Locking / Anti-Theft Systems

J393 - Central control module for comfort system Locations

J519 - Vehicle Electrical System Control Module Locations Locations

J527 - Steering Column Electronic Systems Control Module Locations Locations

J533 - Data Bus On Board Diagnostic Interface Locations Locations

K6 - Indicator light for emergency flasher system

T4 - 4-Pin Connector, at K6 and E3

T16 - 16- Pin Connector, Data Link Connector (DCL), bellow steering column, left

T18 - 18-Pin Connector, at J393

T20 - 20-Pin Connector, at J533

T20a - 20-Pin Connector, at J386

T20b - 20-Pin Connector, at J387

T20d - 20-Pin Connector, at J527

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

Previous Diagram 10/9 (Tracks 99-112)

Next Diagram 10/11 (Tracks 127-140)