LuK

LuK






1 Dual Mass Flywheel

• Make sure it fits securely on the centering pins.

• Keep the clutch lining contact surface free of grooves, oil and grease.

2 Clutch Disc

• Removing and installing, refer to => [ LuK ] Clutch.

• Only replace together with the Self Adjusting Clutch (SAC) pressure plate.

• Installed position, refer to => [ Clutch Disc Installed Position ] Clutch.

3 SAC Pressure Plate

• SAC = "Self Adjusting Clutch"

• Only replace together with the clutch disc.

• Removing and installing, refer to => [ LuK ] Clutch.

• Check the ends of the diaphragm spring. Refer to => [ Checking the Ends of the Diaphragm Spring ] Clutch.

• Check the spring connections and rivet connections. Refer to => [ Checking the Spring and Rivet Connections ] Clutch.

4 Bolt

• M6 bolt - 13 Nm

• M7 bolt - 20 Nm

• Loosen and tighten in small steps and in a diagonal sequence.